Telescopic Belt Conveyor
G-CAN/ULD universal ball platform
Structure: The framework is welded by the section bar.
The siffeners are welded within the framework.
The structure is covered by 8mm thick checkered steel plates .to form the platform. It can carry the above two sorts of full- loaded container and personnel walking on the surface. There are a series of holes punched on the steel plate surface. The universal ball sits in the hole. Universal ball pitch is 200mm.
Surface treatment: checkered steel plate are hot-dipped galvanized, the rest painted.
Platform load: 250kg/BTU
Universal ball: embedded type. Alwayase company product, model: 805-30- l6.
Roller Deck
Overall size (L x W x H): 3300 x 2600 x 508mm
Three-row roller is adopted. The roller is Ф76 x 596 x 3mm (the inlet end adopts Ф76 x 596 x 4mm) . Roller spacing is about 200mm and row spacing is 1302mm.40 x 60 x 4mm rectangular tube as baffle both sides.Angle butt of solid steel block inlet as guide.
The framework is made of 100 x 48 x 5.3mm. The roller was 13 mm higher than the framework. 3mm checkered plates are paved between the rollers. 3mm checkered steel plates are also paved between the aisles. The crossbar spacing is not more than 350mm.
The support feet adopt 100 x 48 x 5.3mm channel steel as column. M16 screw is used for height adjustment.ULD positioning: 40 x 60 x 4mm rectangular tube as fixed barrier strip in the front end of the work position.The back end is provided with a movable block.
G-CAN/ULD Caster Wheel Platform
Standard unit size(L x W x H): 3300 x 2600 X 508mm
(The standard unit can be changed according to the field situation)
Colson JBPN058-CC1/AT16 caster wheels are adopted.The caster wheel bracket adopts 6mm thick steel plate bended into channel steel type. The caster wheel sits in it,connected by bolts M10. The plane is covered with checkered steel plate 3mm thick. The caster wheel is 13mm higher than checkered steel plate.
The girder is made by 220 x 79 x 9mm and the self- made channel steel base is connected with the girder by bolts.The support the foot is adjusted by the M30 screw, δ 30board as the bottom plate.
δ10 plates are as the baffles around the platform, and the bottom around is closed with δ2 plates.
Powered Accumulation Type Roller Conveyor
Roller: galvanized roller
Roller diameter: ф 50mm, INTERROLL company products.
Roller length: 790mm or 990mm (optional)
Roller pitch: 75mm
Friction belt width: 300mm
Power: belt driving structure form, SEW gearmotor.
Conveying speed: 15~ 35m/min
Roller conveyor
Overall size: wide 990mm or 790mm; or 690mm.(optional)
Roller: galvanized free roller; diameter: ф 50mm
Roller pitch: 60mm
Telescopic roller conveyor
Roller: galvanized roller;
Roller diameter ф 50mm, roller pitch 55mm.INTERROLL company products.
One unit is 1000mm, and extension length ratio is 1:2.
Height is 750mm, roller width is 530mm, and frame width is 650mm.
Caster wheels are universal wheels. The end caster wheel is the wheel with brake.
Static load: 300kg/m
CAN/ULD Lifting Platform
Structure: The framework is welded by the section bar. The stiffeners are welded within the framework. The structure is covered by 5mm thick steel plates to form the platform. It can carry the above two sorts of full-laded container and personnel walking on the surface. There are a series of holes punched on the 5mm thick steel plate surface. The universal ball sits in the hole. Universal ball pitch is 200mm. In order that the personal can walk safely on the platform, 3mm thick checkered steel plate is covered on the 5mm thick steel plate.
Platform load: 7000kg
Universal ball: embedded type. Alwayase company product, model: 805-30-16.
Lift stroke: 1800mm ± 40mm.
Speed: 3m/min ＋ 0.03 m/min
Power: 10kw
Hydraulic working pressure: ≥ 12Mpa
Adopting hydraulic lifting double oil cylinder lifting, scissors fork structure.
Transport platform:
Conveying platform structure: universal ball platform, CASTER
universal wheel platform or roller platform
Working state: docking with the truck when rising and docking
with the ULD platform when lowered.
conveying platform size: 3400 x 3400mm, among which
transport channel 3400 x 2600mm and 400mm aisle on each of both sides.
Galvanized Steel Chute
The 3mm galvanized steel plate is bent and formed into the upper smooth surface
The lower end of the slide is equipped with stops to prevent the goods from falling.
The middle of the sliding plate is provided with several movable partitions, which can be moved by manual shift.
Steel structure support and reinforcement are at the bottom.
Sliding board slope is 21-25°， 90° spiral chute slope is 28°。
Static load: 400kg/sqm.